Interiors
Houston Countertops
Surfaces chosen to be lived on, and cut to fit exactly.
Family-owned in Houston since 1993. Call (713) 909-0034 to schedule an estimate.

The work
About Countertops
Countertops are the surface you touch most in a kitchen or bath. The material, the edge and the seams all matter, and so does a measurement taken from the cabinets that are actually in the room.
We help you compare granite, quartz, marble and solid surface for how they look and how you want to live with them, then measure, cut and install the counters.
A slab is templated from the cabinets that are set and level, not from a drawing of the kitchen you wish you had. Seams, the sink cutout, the cooktop cutout, and the overhang are marked on that template. In an out-of-square house, that step is the difference between a counter that looks built and a counter that looks trimmed with caulk.
We compare granite, quartz, marble, and solid surface for how you cook and how much care you want to give the surface. The showroom light and the light in a Memorial kitchen are not the same light.
What is included
- Installation and replacement
- Repairs to existing counters
- Custom edge shapes
- On-site measuring and cutting
- Sink and cooktop cutouts
Materials
Granite · Quartz · Marble · Solid surface
Related guides

Built for Houston
Stone cut to the kitchen you have.
A slab looks one way in a showroom and another once it is the island in a Memorial kitchen or the counter in a Heights bungalow. The edge, the overhang and the seam are what make it feel built for the room.
We measure the cabinets that are actually set, including older houses in Bellaire, the Heights and West University, where a factory rectangle rarely fits.
Houston humidity is a quiet part of the choice. A wood edge or a butcher-block section moves. Stone does not move the same way, but the cabinets under it do. We want the boxes set, fastened, and done moving before the template appointment, so the seams stay where we drew them.
01
Material for the way you cook
Quartz, granite, marble and solid surface wear differently. We talk through care and the edge shape before the stone is ordered.
02
Islands and edges
Waterfall edges, softened corners and sink cutouts are decided with the layout, so the island looks like one piece.
03
Out-of-square rooms
Inside-the-Loop kitchens are seldom perfectly square. Measuring on site is what makes the seams and the overhangs look intentional.
In and around
River Oaks · Memorial · Bellaire · West University · The Heights · Galleria Area · Katy · The Woodlands
Houston
The room the slab has to fit.
The material is half the decision. The other half is the kitchen it has to sit in, including how square the room is and what the foundation is doing under the cabinets.
Out-of-square older kitchens
Heights, Bellaire, and West University counters rarely meet a square corner. A template taken on site is what makes the overhang even and the splash tight. We do not order a factory rectangle and hope the wall agrees.
Islands in newer plans
Katy, Cinco Ranch, and Woodlands kitchens often put the seating on a large island. The overhang, the support, and the seam are structural as well as visual. A waterfall edge is a different fabrication from an eased edge, and it is decided before the slab is cut.
Weight and the cabinet
Stone is heavy. The boxes have to be set and supported before it arrives, including at an overhang where people sit. A slab house and a pier-and-beam house both need level cabinets. The pier-and-beam floor may need shimming so the boxes are level even when the old floor is not.
Permits and the sink
Swapping a counter and setting the same sink back in the same cabinet is usually a finish. Moving the sink, and with it the drain, is plumbing. On a slab that can mean cutting concrete. That is when a permit is more likely. An HOA does not usually review an interior counter.
How it goes
What to expect, step by step.
- 01
See the kitchen
We look at the cabinets, the sink, the cooktop, and whether the cabinets are level. A crooked Heights kitchen is measured differently from a new Katy island.
- 02
Choose the material
Quartz, granite, marble, and solid surface wear differently. We talk through care, seams, and the edge before a slab is ordered.
- 03
Template on site
The template is taken from cabinets that are set, not from a drawing. That is what makes overhangs and seams fit the room you have.
- 04
Fabricate
Cutouts for the sink and the cooktop, the edge, and the seam location are cut from that template. Fabrication does not start on a guess.
- 05
Install
The tops are set, seamed, and caulked to the wall and the sink. A backsplash, if it is part of the job, comes after the stone is in.
- 06
Walk the edges
We look at lips, seams, and the places you will touch every day, and we note anything that still needs a pass.
On the job
How the work moves.
01
Consult
We look at the cabinets, the sink, the cooktop, and how you use the surface. You compare materials for care and for the light in the room. Chips in an existing top are assessed if a repair is the real question.
02
Plan
Edge profile, thickness, seams, and the splash are chosen. The sink and the faucet are selected before the template so the cutout matches the bowl. An overhang that will hold seats is drawn with the support it needs.
03
Prepare
Cabinets are set, leveled, and fastened. Old tops come off with the sink protected if it is staying. The room is clear for the template, because a tape measure over a crooked old counter is not a template.
04
Build
The template is taken from the finished boxes. Fabrication follows that pattern, including the sink and cooktop cutouts. Installation sets the slabs, aligns the seams, and sets the sink.
05
Finish
Seams are finished, the sink is connected, and the joint at the wall is closed. A stone that wants sealer gets it. We wipe the surface down and look at the overhang in the light you will use.
06
Walk through
We walk the seams, the cutouts, and the edges with you. Care for the material you chose is part of that conversation, including what will etch marble and what quartz will shrug off.
Signs
Signs the counters are the project.
The seams and the wall have parted
A gap at the backsplash or a seam that has opened is often the house or the boxes moving. A new top on unlevel cabinets will open the same way.
The surface no longer fits the cooking
Etched marble you are tired of babying, a laminate seam at the sink, or a cooktop cutout for an appliance you replaced are reasons to retop, not to live with the old one.
The island is too shallow to use
An overhang that hits your knees, or a seating side with no support, is a layout problem we can see. The new top is templated to the overhang you actually want.
A chip or a crack at the sink
Some chips can be repaired. A crack that runs, or a top that has swollen at the dishwasher, is usually a replacement. We look before we recommend either one.
Materials
Granite, quartz, marble, and solid surface.
These are the counters we install. The right one is the one you will cook on, not the one that looked quiet in a sample box.
Quartz
A manufactured surface with a consistent pattern and very little day-to-day care. It is not porous the way granite is. Heat still belongs on a trivet. Seams are planned so the pattern does not break in the middle of the island if we can avoid it.
Granite
Natural stone, so the slab you reserve is the slab you get. It is usually sealed. It will take more heat than quartz and it will still mark if the sealer is ignored for years. We look at the actual slab for pits, fissures, and where the vein will land on the island.
Marble
The care is the decision. Acid etches it. Water spots show. Many Houston kitchens still choose it for the look, and we will install it, with an honest conversation about the sink and the range. A honed finish hides etching differently than a polish.
Solid surface
An even color, a seam that can be less visible, and a sink that can sometimes be integrated. It scratches differently from stone and it can often be repaired in place. It is a practical top in a laundry, a bath, or a kitchen that wants a quieter surface.
Cost
What Houston countertops tend to cost.
A typical kitchen, not a huge island with two waterfalls, is the picture behind these ranges. The slab price, the edge, the number of cutouts, and a second trip for a complicated seam are what move a job inside the range.
- Solid surface, a typical kitchen$1,800 to $4,500
- Granite or quartz, a typical kitchen$3,500 to $9,000
- Marble or a waterfall island$6,000 to $14,000
These are typical planning ranges for countertops in Greater Houston, not a quote. The size of the job, the materials, and what we find at the house move the number. The price comes from an on-site estimate. Call (713) 909-0034.
Material and the slab
A standard quartz or granite is a different number from a thick marble or a slab chosen for a specific vein. The remnant and the full slab are not the same purchase.
Edges, seams, and cutouts
An eased edge is simpler than a waterfall or a miter. Every sink, faucet hole, and cooktop cutout is time in the shop and risk in the slab.
The cabinets under it
A template on level boxes is one visit. Boxes that have to be reset, or a sink that moves, are a different scope and can pull plumbing into the price.
Signs
Signs the counters are the project.
Counters are ready to replace when the surface is etched, cracked, or burned, when the seam has opened, or when a laminate top has swollen at the dishwasher. They are also ready when the cabinets are new and the old top cannot be saved, or when you want a different edge and a real overhang on an island. A chip at a corner can be a repair. A crack that runs, or a top that has lost its bond to the cabinet, usually is not.
If the cabinets under the top rock, or the sink cabinet is soft, the counter is not the first fix. Stone is heavy and it needs a level, sound cabinet. We look at the cabinets before we measure.
01
Damage versus wear
A chip can often be repaired. A crack through a sink cutout, or a swollen seam, is usually a replacement. We say which after we see it.
02
The island feels short
Overhang, seating, and an edge that drops to the floor are layout decisions. They are priced with the slab. They are not a trim piece added later.
03
The sink is part of it
An undermount sink and a new faucet hole are cut with the top. The sink you are keeping has to be one we can reset cleanly.
Materials
Quartz, granite, marble, and solid surface.
Quartz is consistent and asks less daily care. Granite is a natural slab, so movement in the pattern is the material, and it wants a sealer on a schedule. Marble etches from acid and scratches if you use it as a cutting board. People still choose it with their eyes open. Solid surface can be seamed quietly and is practical in a small bath or a laundry. None of these is wrong. The wrong one is the one you did not want to maintain.
Edges, thickness, and the seam are the decisions that change how the top looks in the room. A waterfall edge uses more slab and more labor. A seam should fall where the pattern and the cabinet allow, not across the sink if that can be avoided. Dark polished stone shows every grain of Houston dust and every water spot. Honed finishes hide more and stain differently. We talk through that in the light of your kitchen.
01
Sink and cooktop cuts
Undermount sinks, farm sinks, and cooktops each need support and a cutout planned with the cabinet. The template includes them.
02
Bath tops
A vanity top is a smaller slab and the same idea: a template, a cutout, and a backsplash or a counter that meets the mirror.
03
Care you will actually do
If you will not seal stone or wipe acid off marble, we say so before it is ordered. The material should match the kitchen you run.
Cost
What moves a countertop number.
As a planning range, not a quote, quartz or granite for many Houston kitchens falls around $3,500 to $9,000 installed. Marble, a waterfall edge, or a large island often plans around $8,000 to $18,000, and a very large or heavily veined slab can sit higher. Square footage is only the start. The edge, the number of cutouts, the seam, and whether the old top comes off a fragile cabinet all move it. A bath vanity is a smaller version of the same work.
Repairing a chip is not in those bands. We look first and tell you if a repair is the honest job. Replacing a top during a full kitchen remodel is priced with the kitchen. The ranges on this page are the counter work itself, so you can see what the stone is doing inside a larger budget.
01
Slab and layout
A seam that forces a second slab, or a dropped edge that needs a matched pattern, uses more stone. We show that before the order.
02
Cabinets that are not level
Shimming and repairing cabinets so a stone top sits flat is prep. Skip that and a seam can open later.
03
Removal
An old tiled-in top or a stuck laminate top takes longer to get off. We account for what is actually there.
Houston
Out-of-square rooms and Gulf humidity.
Older kitchens in the Heights, Bellaire, and West University are seldom square. Measuring on site is the whole point. A top cut from a plan will gap at the wall or run long into a crooked corner. Newer houses in Katy and The Woodlands are squarer and still need a measure once the cabinets are set, because an island overhang is measured in the room. A catalog default will miss it.
Humidity does not etch quartz, but it does show up at a wood cabinet and at any wood edge you ask the stone to meet. The cabinets should be stable before a heavy top goes on. If a leak softened the sink box, that repair happens first. A planned counter replacement is not an insurance claim. A counter being replaced because a dishwasher flooded the kitchen is documented with the water loss, and your insurer decides coverage.
01
Measuring order
We measure after the cabinets are set and level. In a remodel, that is its own step. Cutting does not start while the cabinets are still a guess.
02
Heat at the range
A pot pulled off a burner needs a surface that can take it. We talk about that with the material, without pretending any top is indestructible.
03
Permit
Swapping a top on existing cabinets usually does not, by itself, need a building permit. Plumbing or electrical changes tied to a new sink or cooktop can. We say which.
Related work
Seen in the field.

Coffered Ceilings & Marble Islands

Coffered Ceilings & Marble Islands

Coffered Ceilings & Marble Islands

Coffered Ceilings & Marble Islands

Coffered Ceilings & Marble Islands

Coffered Ceilings & Marble Islands

Downstairs flooring, stairs and kitchen in BlackHorse Ranch, Cypress

Downstairs flooring, stairs and kitchen in BlackHorse Ranch, Cypress

Downstairs flooring, stairs and kitchen in BlackHorse Ranch, Cypress

Downstairs flooring, stairs and kitchen in BlackHorse Ranch, Cypress

Downstairs flooring, stairs and kitchen in BlackHorse Ranch, Cypress

Downstairs flooring, stairs and kitchen in BlackHorse Ranch, Cypress

Downstairs flooring, stairs and kitchen in BlackHorse Ranch, Cypress

Downstairs flooring, stairs and kitchen in BlackHorse Ranch, Cypress

Water damage repair and rebuilt kitchen and bath in Crosby

Water damage repair and rebuilt kitchen and bath in Crosby

Water damage repair and rebuilt kitchen and bath in Crosby

Water damage repair and rebuilt kitchen and bath in Crosby

Water damage repair and rebuilt kitchen and bath in Crosby

Water damage repair and rebuilt kitchen and bath in Crosby

Water damage repair and rebuilt kitchen and bath in Crosby

Water damage repair and rebuilt kitchen and bath in Crosby

Water damage repair and rebuilt kitchen and bath in Crosby
Questions
Good to know.
Which countertop is practical for a busy Houston kitchen?
It depends on how you cook and how much upkeep you want. Quartz and granite ask less day to day than marble. We walk through the tradeoffs in your kitchen so the choice fits the way you use it.
Can you repair a damaged countertop instead of replacing it?
Often, yes. We look at chips, cracks and seams first and tell you whether a repair or a replacement makes more sense.
Should I choose quartz, granite or marble?
It depends on the look you want and how much care you want to give it. Quartz and granite ask less day to day than marble. We walk through the tradeoffs in your kitchen or bath, including how stone marks if that matters to you.
Do you measure before the old counters come out?
Measuring happens when the cabinets are set and level. In a remodel, that is its own step, scheduled so we cut from the real kitchen, not a guess.
Do I need to be home when you measure?
Yes. The template is taken from the cabinets that are actually there, not from a drawing. Houston kitchens are rarely square. If you will not be home, someone who can unlock the house and answer a question about the sink should be.
How long from the measure to the install?
It depends on the stone and the shop. Stock quartz is faster than a slab that has to be ordered. We give you the sequence after the measure. We do not promise a citywide number of days on this page.
Can I use the sink the day the counter goes in?
Not always. The sink and the cooktop have to be set, and the plumbing has to be reconnected. We tell you whether that is the same day or the next visit. Plan one night without a kitchen sink.
What if the cabinets are out of level?
Then the stone is not the first fix. A counter follows the boxes under it. Soft or swollen cabinets, often from a slow leak, get repaired first. Setting a heavy top on a bad box cracks the top or opens the seams.
Will a hot pan hurt the counter?
It can, depending on the material. Quartz and solid surface do not like a pan straight off the burner. Granite is more forgiving and still not a trivet. We talk about how you cook before you pick the slab.
Do you cut the sink and the cooktop?
The openings are part of the fabrication, from the template, not a guess in the driveway. If the sink is staying, we need to see it. If it is new, we need the model before the slab is cut.
Do you haul away the old counter?
Yes, when we are replacing it and the cabinets can take the new one. A stone top is heavy. We protect the floors on the way out. If the cabinet below is rotten, that repair is separate and it happens first.
Will an HOA care about kitchen counters?
Almost never. Counters are inside. The association questions we see are about roofs, fences, and paint on the street. Your building permit, if the sink moves, is a city or county matter, not an HOA color chip.
Which surface is practical in a busy Houston kitchen?
Quartz and granite ask less day to day than marble. Solid surface is a practical option in smaller rooms. We walk the care, not a slogan, in the kitchen you cook in.
What is a planning range for new counters?
Quartz or granite for many kitchens falls around $3,500 to $9,000. Marble, a waterfall, or a large island often plans around $8,000 to $18,000. Those are planning ranges, not a quote.
Why not template from the drawing?
Inside-the-Loop kitchens are often out of square, and even a new cabinet run is only final once it is set. The template is taken from the room so seams and overhangs fit.
Can a cracked counter be repaired?
Sometimes, if the crack or chip is limited and the top is still bonded. We look before we recommend a repair or a replacement.
What do new kitchen countertops typically cost in Houston?
Solid surface on a typical kitchen often plans at $1,800 to $4,500. Granite or quartz often plans at $3,500 to $9,000. Marble, or an island with a waterfall edge, often plans at $6,000 to $14,000. Those are typical planning ranges, not a quote. A bath vanity is usually less stone and a smaller number.
Why is the template taken after the cabinets are set?
Because the slab is cut to the boxes that are actually there. Older Houston kitchens are out of square. If we template too early, the seams and the overhangs move when the boxes are leveled.
Does a new countertop need a permit?
Not when the sink stays put and no plumbing moves. Moving the sink is plumbing, and on a slab it can mean cutting the concrete. That is the point where a permit is more likely.
Which surface handles a busy Houston kitchen?
Quartz and granite ask less day to day than marble. Solid surface is the quieter, more repairable option. Humidity does not etch stone, but it does move the wood around the top, so the boxes are set before we template. We walk through care in your kitchen before the slab is ordered.
From the blog
Often paired with
Greater Houston
Areas we serve
Countertops is scheduled from our office in west Houston (77082). The closest neighborhoods have their own pages. Every community below has a page for this service.
- Meyerland
- Montrose
- Garden Oaks
- Oak Forest
- Kingwood
- Cypress
- Spring
- Humble
- Friendswood
- Tomball
- Missouri City
- Fulshear
- Copperfield
- Rosenberg
- Jersey Village
- Towne Lake
- Bridgeland
- Sienna
- Houston
- Westchase
- Alief
- Energy Corridor
- Katy
- Sugar Land
- Bellaire
- Memorial
- Spring Branch
- The Heights
- River Oaks
- West University
- Galleria Area
- Upper Kirby
- Rice Village
- Medical Center
- Bunker Hill
- Piney Point
- Hunters Creek
- Bear Creek
- Cinco Ranch
- Stafford
- Richmond
- Pearland
- Clear Lake
- Baytown
- Galveston
- Texas City
- The Woodlands
- Magnolia
Planning countertops?
Serving Houston since 1993. Call (713) 909-0034 to schedule an estimate.
