Three fireplaces, three materials
A wood-burning firebox, a gas log, and a fireplace that is only a shelf do not take the same tile. Heat at the opening is the difference. We ask what you light, and we look in the firebox, before a showroom sample is treated as a yes. A surround that never sees flame can use materials a working firebox should not. Guessing, and then discovering the damper still opens into a humid Houston attic, is how a pretty wall hides a draft.
Older brick in Oak Forest, Montrose, and Garden Oaks is often painted, stained, or already covered once. The brick may be out of plane. Large tile will show that. We flatten what has to be flat, or we choose a tile and a joint that can live with a little movement. Clay soil moves the slab under these houses between wet weeks and dry ones. A rigid hearth with no give will telegraph a crack. We do not promise a slab will sit still. We build the hearth so it has a fair chance.
The surround people actually see
In a Houston house the fireplace is the wall you see from the kitchen and from the sofa. The living room is also the room the air conditioner is trying to dry. A dark tile and a heavy mantel can look right in a photo and too heavy in a low ranch ceiling. We measure the wall, the ceiling height, and the walk past the hearth before the pattern is locked. A hearth that sticks into the path will be chipped. A hearth that is too low becomes a step nobody expected.
The pattern is planned the way a backsplash is planned, except the heat rules are stricter. The center of the layout should land on the opening, not on an awkward cut beside the mantel leg. Glossy tile shows soot and every wipe. Matte tile hides more and is harder to clean if the fire is used. Grout near a working opening has to tolerate heat. We say that before the material is ordered, not after the first firing stains it.
Mantel, panel, and the wall around them
The mantel is carpentry. It has to be sized to the room and fastened to something solid, not to a skim of old mortar. Paneling and built-in shelves often travel with the tile. Doing them together keeps the joints honest. Paint comes after the dusty cuts, or we mask with real care if the walls are already finished. A living-room project that tiles the fireplace and then paints into wet thinset is the wrong order.
If a roof leak or a window above the fireplace stained the wall, that water is a different job. The drywall and the insulation have to be dry before a new surround closes them. Photograph the stain before it is covered. If insurance is involved, Elite works with your insurance company as your contractor and negotiates the claim scope with the adjuster. We are not public adjusters. Your insurer decides the claim. The new tile, if the old surround was already something you wanted to change, should be written as its own scope.
What the job depends on
People also ask us to tile over a surround that is already failing. Loose brick, a cracked mortar joint, and a wood mantel that is soft at the leg have to be repaired first. Tile does not tie a loose wall together. Interior wall tile from a bathroom leftover is a common mistake on a firebox that still burns. If the fireplace has a screen or a glass front, we measure the swing and the frame so the new hearth does not block it. Soot on the old face is cleaned enough to see the brick. Covering soot and hoping the thinset holds is how a surround lets go on the first cool night someone lights it.
A straightforward tile surround, once the material is in the house, is often a few days. A new mantel, a hearth that has to come up, or brick that has to be rebuilt takes longer. We tell you after we see the fireplace. Thinset and grout need time before anyone loads the mantel with the frame that has been in a closet. Cost follows the tile, the pattern, whether the firebox needs work, and how much of the wall around it is coming along. A typical surround varies by those facts. We do not price it from a picture of a different chimney.
Call (713) 909-0034 to schedule an estimate. Tell us whether you light the fireplace, and with wood or gas. We have been family-owned, serving Houston since 1993. If the glass front is cracked or you smell soot in the attic, say that on the call. We look before we cover anything.
Questions
Good to know.
Can you tile a fireplace we never light?
Yes. Many Houston fireplaces are decorative. We still look inside the firebox so we do not cover a crack or a damper that is stuck open to the attic. If you might light it later, say so now. The material is cheaper to choose before the tile is up.
Is gas-log tile the same as wood-burning tile?
No. A wood fire, a gas log, and a surround that never sees flame are different heat. We ask before we order. A tile that is fine beside a shelf can be the wrong tile beside a firebox that burns.
Can the mantel and the tile be one project?
Yes. The mantel, the paneling, and the hearth are easier when they are planned with the tile. Paint comes after the dusty work, or the fresh wall gets cut. We sequence that on purpose.
Will an HOA care about a fireplace?
Almost never. The surround is inside. Associations in Kingwood, Cypress, and Fulshear ask about roofs, fences, and the color on the street. A permit is a separate question if the work changes structure or the flue, and we say so after we see it.
